|
0-9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Joker Command FAQ
Why some enable codes may not work
It just so happens that some new Sony Playstation games
have had some protection on them to blockout piracy and
hackery, which if this would have worked for that purpose, would have been good, but it means that anyone with a modchip
can't play the game, even if their cd wasn't pirated.
The one thing to keep noted is that if you can't get the Enable Code to work, then the problem probably is one of
these: You dont have a high enough Cheat Device version to use the codes. Or you have Cheat Device 2.41 or higher, and
the codes dont work, you need to add the code "C1000000 0000" and it will work. |
| Question |
Answer |
| What is a Joker Command? |
It is a code whose address is a position in RAM, that tells when a button on
the controller is pressed. |
| Does everygame have a Joker Command? |
Yes, every game has a Joker Command, but some are non-normal and non-reverse
joker commands. |
| What does a Joker Command do? |
It is used to avoid lockups during the intros or varios places in the game,
or when you only want to activate codes at a certain time and not constantly have the effect of the code. It's Purpose
is to activate codes at the touch of a button. |
| Can you activate all codes from a Joker Command? |
Yes. All you have to do, is put in the Joker Command Code in the Master Code
Section, otherwise, it will just turn on the code that is below it. |
| Once I Have The Joker Command in, How do I Use it? |
Well if you are using the Joker Command in a regular code box, not Master
Code section, then when you press the button/s specified by the Quantity Digits below, the value that you change the
'????' to, inside of the game, it will activate the code you have put in under the Joker Command code. If if was put in
the Master Code Section it would activate all codes when that button was pressed. |
| If Entering a Joker Comand in Normal Code Section. |
Be sure to enter the code that you want the Joker Command to Actiavte Right
Underneath of the Joker Command Code. |
| Eample |
Say you have Infinite Health for a game. the Infinite Health code is,
8012C04C 00AA, and the Joker Command is D0012876 ????., and it is a Normal Joker Command. And in the game, Select doesnt
do anything. Well, take a look at the Quantity Digits and you will see that Select is value 0100 for a Normal Joker
Command. So you enter the following codes, D0012876 0100, and under it 8012C04C 00AA. Now when you are in the game with
this code on, when you press Select it will refill you energy. Or if you hold Select and no other buttons it will give
you Infinite Health. However, once you let go of Select, you no longer have Infinite Health, so get a little farther in
the level, you notice that you have lost some energy, so press Select to FILL back up your energy. And so on. |
Normal Joker Command Quantity Digits
| Quantity Digits |
Button Pressed to Activate |
| 0001 |
L2 Button |
| 0002 |
R2 Button |
| 0004 |
L1 Button |
| 0008 |
R1 Button |
| 0010 |
Triangle Button |
| 0020 |
Circle Button |
| 0040 |
X Button |
| 0080 |
Square Button |
| 0100 |
Select Button |
| 0800 |
Start Button |
| 1000 |
Up Direction |
| 2000 |
Right Direction |
| 4000 |
Down DIrection |
| 8000 |
Left Direction |
| Multi Buttons |
To use any combination of buttons, like, press Select and L1 to enable the
codes. Just add the two digits up for Select and L1. 0100 plus 0001 equal 0101, so 0101 would enable the codes when you
push select and L1 on the first controller |
Reverse Joker Command Quantity Digits
| Quantity Digits |
Button Pressed to Activate |
| 0100 |
L2 Button |
| 0200 |
R2 Button |
| 0400 |
L1 Button |
| 0800 |
R1 Button |
| 1000 |
Triangle Button |
| 2000 |
Circle Button |
| 4000 |
X Button |
| 8000 |
Square Button |
| 0001 |
Select Button |
| 0008 |
Start Button |
| 0010 |
Up Direction |
| 0020 |
Right Direction |
| 0040 |
Down DIrection |
| 0080 |
Left Direction |
| Multi Buttons |
To use any combination of buttons, like, press Select and L1 to enable the
codes. Just add the two digits up for Select and L1. 0001 plus 0100 equal 0101, so 0101 would enable the codes when you
push select and L1 on the first controller |
Max Normal
Joker Command Quantity Digits
| Quantity Digits |
Button Pressed to Activate |
| FFFF |
No Buttons |
| FFFE |
L2 Button |
| FFFD |
R2 Button |
| FFFB |
L1 Button |
| FFF7 |
R1 Button |
| FFEF |
Triangle Button |
| FFDF |
Circle Button |
| FFBF |
X Button |
| FF7F |
Square Button |
| FEFF |
Select Button |
| F7FF |
Start Button |
| EFFF |
Up Direction |
| DFFF |
Right Direction |
| BFFF |
Down DIrection |
| 7FFF |
Left Direction |
| Multi Buttons |
This is not the only way, but is a quick and easy way to do this. To use any combination
of buttons, like, press Select & L1 to enable the codes. Just add the two digits up for Select & L1. FEFF plus
FFFB equals 1FEFA. Joker Code digits area always 4 digits long, so take the 1 off, and add it to FEFA, and your final
answer is FEFB for Select & L1. |
Max Reverse Joker
Command Quantity Digits
| Quantity Digits |
Button Pressed to Activate |
| FFFF |
No Buttons |
| FEFF |
L2 Button |
| FDFF |
R2 Button |
| FBFF |
L1 Button |
| F7FF |
R1 Button |
| EFFF |
Triangle Button |
| DFFF |
Circle Button |
| BFFF |
X Button |
| 7FFF |
Square Button |
| FFFE |
Select Button |
| FFF7 |
Start Button |
| FFEF |
Up Direction |
| FFDF |
Right Direction |
| FFBF |
Down DIrection |
| FF7F |
Left Direction |
| Multi Buttons |
Multi Buttons - This is not the only way, but is a quick and easy way to do this. To use
any combination of buttons, like, press Select & L1 to enable the codes. Just add the two digits up for Select &
L1. FFFE plus FBFF equals 1FBFD. Joker Code digits area always 4 digits long, so take the 1 off, and add it to FBFD, and
your final answer is FBFE for Select & L1. |
|
